This section describes the backup operation screen. The screen operation procedure varies depending on the PLC CPU
model used and whether or not passwords have been set. For details of the operating procedure, refer to the following.
Touch operations on the switches ([CPU No.1], [CPU No.2], [CPU No.3], and [CPU No.4]) are invalid.
When the screen shown below appears, touch [YES].
When the screen shown below appears, touch [OK], and input a password using the key window.
If a password has been set for the program of the PLC CPU, the screen shown below appears. Touch [OK],
and enter the password in the key window.
When inputting passwords have been finished, the backup processing will be executed.
15 - 62
15.8 Backup and Restoration
15.8.5 Security and password