2. GOT BASIC SETTING
Setting screen for display and setting screen for operation can be displayed from the GOT utility screen.
In the setting screen for display and the setting screen for operation, the following settings can be set.
IP filter setting
Utility call key
GOT internal device monitor
Opening screen time, screen save time, battery alarm display, human sensor, sensor detect level,
sensor detect time, sensor off delay, brightness adjustment mode, brightness adjustment, POWER LED
Number setting, GOT name display, GOT description display
Ethernet communication unit, IP address, subnet mask, default gateway, peripheral software port No.,
transparent port No., behavior of duplicate IPs
IP filter usage, setting for access from IP addresses, target IP address, exception IP address,
specification of target IP address ranges
Buzzer sound, musical interval, window move buzzer volume, Key sensitivity, Access switch for the
Call key setting, pressing time setting
USB mouse setting, interlock with mouse cursor touch operation, USB keyboard setting, USB keyboard
Current time, GOT internal battery voltage status
Adjust the clock, mode, reference CH No., SNTP IP address, trigger type, specify the time zone of
target unit, time zone, time difference from GMT
Broadcast the clock data, broadcast CH No., trigger type, specify the time zone of target unit, time zone,
time difference from GMT
Specify time zone, time zone, time difference from GMT
The setting contents of the communication interface can be checked or changed.
The contents of the Ethernet setting can be checked and the host can be changed.
Channel No. setting
Setting whether to use the GOT internal device monitor of the GOT diagnostics function
Security level authentication
Operator management, password change function setting
2 - 1