Mitsubishi Electric GOT2000 Series User Manual page 427

■3. Change of station No.
Step 1.
Touch the station No. to be changed, and input the station No. of the destination Ethernet module to be
changed by the numeric keypad displayed.
Step 2.
After the setting change, touch the [×] key. When the screen shown below appears, touch the [YES] key.
■4. Change of IP address
Step 1.
Touch the IP address to be changed, input the destination IP address to be changed by the numeric keypad
displayed.
Step 2.
After the setting change, touch the [×] key. When the screen shown below appears, touch the [YES] key.
Touch YES.
Touch YES.
11.3 Ethernet Communication (Ethernet models only)
11
11 - 23