2.10.4
Controller setting operation
■1. Assign Ethernet I/F operation
The following describes how to operate the Ethernet I/F assign.
The setting operation is same as that of the communication setting screen.
Step 1.
Touch the [Assign Ethernet I/F] button in [Communication setting].
Step 2.
After the screen shown below is displayed, touch the channel number specification menu BOX when
changing the channel number.
➠ ■3.
Step 3.
For changing the parameter settings, touch the driver display BOX.
➠
2 - 54
2.10 Controller
Channel number setting operation
2.10.5 Communication detail setting