■3. Function setting operation
Touch [Operator] → [Function], and then the Admin password authentication dialog box is displayed.
When the administrator password is correctly input, the Function setting screen in displayed.
Touch the [Next] switch to switch the setting screen, and touch an item to be set.
1) Auth method
The authentication method is switched.
Touching the authentication method switches the selected item in order of [Password] → [Ext. auth. ] → [Ext.
auth. / Password].
2) Auto logout time
Touch [Automatic logout time] to display the ten-key pad. Input a setting time. When the input is completed,
touch the [ENT] key.
3) Expiration date
Touch Expiration date to display the ten-key pad. Input a setting time. When the input is completed, touch the
4) Ext. auth. ID Initial position
The starting position of an external authentication ID (Number of bytes) can be set from the data read from an
external authentication device.
5) Ext. auth. ID Valid byte count
The valid number of bytes for an external authentication ID can be set.
(This setting is available only when [External auth] or [Ext. auth. / Password] is set as the authentication
13 - 16
13.2 Operator Authentication
button displayed on the upper right saves the setting contents and returns to the previous