Cannot generate Advanced recipe
Unable to save device value to
Advanced recipe file.
Advance recipe file save error
Advanced recipe file upload error
Specified Advanced recipe number
does not exist.
Specified record number does not
Cannot save recipe data to read only
Recipe device save error. Recipe file
does not exist.
Recipe device upload error. Recipe
device value does not exist.
Advanced Recipe error. Check
The extension specified to the recipe
file is invalid.
The setting of G1P file of the original
diversion is different from the project
Logging file error.
Logging setting does not exist or
setting value error.
The specified logging ID does not
The specified logging setting is
Printer unit error.
Video/RGB unit not mounted
External I/O unit error
8 - 12
8.2 Error Codes and System Alarm List
Cannot generate recipe file. Confirm the following and execute recipe processing
• Confirm whether the SD card or USB memory is installed.
• Close the SD card cover to make the SD card accessable.
• Confirm the available memory of the SD card or USB memory.
Unable to save device value to recipe file.
• Confirm the write-protection of the SD card or USB memory.
• Confirm whether the attribute of saving file is for reading only.
An error has occurred during the recipe file writing. Do not pull out the SD card or
USB memory while the Recipe is operating.
An error has occurred during the recipe file reading.
Do not pull the SD card or USB memory out while the Recipe is operating.
The recipe of non-existing number is about to be executed.
Execute recipe of existing number.
The advanced record of non-existing number is about to be executed.
Execute record of existing number.
Saving recipe is about to be executed to the record of which recipe device value
cannot be edited.
Make the recipe device value of the record editable with Recipe Setting of GT
Designer3 or specify the record of which recipe device value can be edited.
Saving recipe is about to be executed to the recipe setting that is set for not using
Specify the recipe setting that uses file.
Loading recipe is about to be executed to the record of which recipe device value is
Specify the record of which recipe device value is set.
The recipe setting is not correct.
Confirm the recipe setting of the project data and download it to the GOT again.
Check if the file name is appropriate.
The file name contains invalid characters. For the details, refer to the following.
The settings of the sourcMatch the settings of the advanced recipe file and those of
the GOT2000 recipe file, or delete an unnecessary advanced recipe file from the
memory card.e advanced recipe file are not matched with those of the GOT2000
recipe file, or incorrect.
Logging file error.The setting of G1P file of the original diversion is different from
the project data.The setting of G1P file of the original diversion is different from the
When collecting data again, delete logging files and management files.
Logging setting does not exist or setting value error.
Specify an existing logging setting in the historical trend graph setting and the
historical data list setting.
Check the logging ID in the historical trend graph setting.
• Specify an existing logging ID in the Logging ID External Control device.
• Select the graph offset function to specify an existing logging ID in the logging
• Configure the setting so that the number of logging devices set for the logging ID
exceeds that of data lines on the historical trend graph.
• Configure the setting so that the data type of the logging device set for the
logging ID is the same as that of the device specified in the historical trend
The printer unit is installed incorrectly. The built-in flash memory of the printer unit
is broken or the guaranteed life has been elapsed.
Check that the printer unit is installed correctly.
When the printer unit has been installed correctly, the built-in flash memory is
broken or the guaranteed life has been elapsed. Replace the printer unit with new
Check if the video/RGB input unit is installed.
Check if the GOT used supports video/RGB input.
Check if the external I/O unit is correctly installed.
GT Designer3 (GOT2000) Screen Design Manual