(3) Function setting operation
Step 1.
Touch [Function setting] in the operator setting menu, and then the Admin password authentication dialog
is displayed.
Step 2.
Input the administrator password.
Character types to be input can be changed with touching the following buttons.
[A-Z]: Alphabet capital
[a-z]: Alphabet small letter
[0-9]: Numeric
When the input is completed, touch the [Enter] key.
Step 3.
When the administrator password is correctly input, the Function setting screen in displayed.
Touch an item to be set.
1)
2)
3)
4)
5)
2 - 98
2.15 Operator Authentication
7)
8)
9)
10)
6)