Memory Check Operation - Mitsubishi Electric GOT2000 Series User Manual

6.12.3

Memory check operation

Carries out write/read check of memory.
POINT POINT POINT
When drive is not displayed
When the drive (memory) to check is not displayed, confirm the mounting procedure or memory
type with reference to the following.
When no faults are found in mounting, etc, a memory failure may be arosen.
Replace the data storage or built-in flash memory (C drive).
For details of built-in flash memory, contact your local Mitsubishi (Electric System) Service.
The following example explains about Memory Check using built-in flash memory (C drive).
For the Built-in SD card (A drive) memory check, install the SD card before carrying out the same
key operations as those for the built-in flash memory check. For the USB drive (B drive, E drive,
F drive, or G drive) memory check, install the USB memory before carrying out the check
operations.
Step 1.
Select [Flash Memory] in the Memory check setting
screen.
If select the [OK] button, the numeric keyboard window
is displayed.
If select [Cancel] button, returns to the initial menu.
Step 2.
Touch to input password ([5] [9] [2] [0]) and touch the
[Enter] key.
If touch the [Enter] key,executes read/write check for
the built-in flash memory, which is completed in around
10 seconds.
➠
GOT2000 Series User's Manual (Hardware)
6.12 Memory Check
6
6 - 121