Mitsubishi Electric GOT2000 Series User Manual page 42

1 - 10
1.3 Utility display
POINT POINT POINT
Locking the utility display by password
When you try to display the utility main menu while the password is set to the GOT by GT
Designer3, the display for password input will be appeared.
(Set a password from the common setting menu.)
When the password is not matched, displays the error message.
When touching the [OK] button, the screen returns to the monitor screen.
(1) Input operation of password
Step 1.
Input the password after touching [0] to [9], [A] to [F] key.
Step 2.
Define the password by touching [Enter] key, after password input.
Step 3.
To correct the input character, touch [Del] key to delete the correcting character
and reinput/retype the new character.
(2) Password input cancel operation
When the button is touched, it returns to the monitor screen.
Refer to the following for the details related to the password setting.
➠ GT Designer3 (GOT2000) Screen Design Manual