Utility Call Key
Utility call key setting
The key position for calling the main menu of the utility can be specified.
For the key position, the specification of 1 point from 4 corners on the screen, or no specification, can be set.
(No specification can be set when GT Designer3 is used.)
By keeping pressing the screen, a setting to switch the screen to the utility is available.
This prevents a switching to the utility by an unintentional operation.
Display operation of the utility call key setting
GOT basic setting
Touch [Utility call key].
2 - 26
2.7 Utility Call Key
Operation setting by GT Designer3
Set the utility call key at [GOT set up] in [Environmental Setting] of GT Designer3.
When change a part of the setting, change the setting by the GOT display setting after
downloading the project data.
GT Designer3 (GOT2000) Screen Design Manual
Utility call key