Mitsubishi Electric GOT2000 Series User Manual page 374

(3) When the version is the same or newer regardless of the data stored in the data storage
(conditions (1) and (2) above)
The version information and a dialog for selecting whether or not to continue installation are displayed.
OK
Touching the
Cancel
Touching the
■2. System application installation
(1) Version of each system application
Match the version of each system application when installing system applications.
System applications cannot be installed if the version of each system application does not match.
When the installation process is discontinued.
Basic system application
Communication driver
System application (Extended function) : 2. ○. ○
(2) When using package data created with GT Designer3 Version1.122C or later
If package data created with an earlier version of GT Designer3 than 1.122C or later is installed, the GOT ID No. and
the communication settings may not be reflected.
To reflect the GOT ID No. and the communication settings, them in the utility.
➠
7 - 10
7.4 When Installing the Different Version of BootOS, Basic System Application
<GOT screen when BootOS is installed from the data storage.>
button executes installation.
button cancels installation.
: 1. ○. ○
: 2. ○. ○
Please match the number.
2.3 Unique Information
2.10 Controller
POINT POINT POINT
Checking method of BootOS, system application version
Confirm the version of BootOS installed in the GOT at product shipment by rating plate of GOT
rear face
GRAPHIC OPERATION TERMINAL
GT2708-VTBA
MODEL
100-240VAC 50/60Hz
IN
MAX 100VA
POWER
123456789012
MAC ADD.
00013910AA00000-A
SERIAL
2013-09
DATE
MADE IN JAPAN
When the installation process is normally executed.
Basic system application
Communication driver
System application (Extended function) : 2. ○. ○
PASSED
: 2. ○. ○
: 2. ○. ○
A A A A
BootOS version
(In case that the BootOS is two digits,
only the first digit is written.)