6-3-10 Data Operation - Omron CS1W-MCH71 Operation Manual

Command Details
Shift Right/Shift Left
(SFTR/SFTL)
Command type
Format
Operand
Operand
Shift object Variable Variable
Shift amount Word type
(See note.): 1 to 16
Long word type
(See note.): 1 to 32
Note
Description

6-3-10 Data Operation

BCD to BIN (BIN)
Command type
Format
Operand
Operand Setting range
First term Variable
Second term Word type:
0-9999
(See note.)
Long type:
0-99999999
368
• If the logic operation expression is false, SET or RESET command does
not turn ON or OFF the specified bit.
• When the logic operation is executed on each corresponding bit with the
logic operator on the right side and if there is any bit having the result of 1,
it is considered to be true. On the other hand, if all the bits are 0, it is con-
sidered to be false.
The Shift Right/ Shift left (SFTR/SFTL) command shifts variables.
SFTR: Multiple execution command
SHTL: Multiple execution command
SFTR<shift object variable>_N<shift amount>;
SFTL<shift object variable>_N<shift amount>;
Ex: SFTR #MW1000 N2;
Setting range Decimal
No
No
Setting range varies depending on the type of the shift object.
• SFTR command shifts Shift object variable to the right for the amount
specified in Shift amount.
• SFTL command shifts Shift object variable to the left for the amount spec-
ified in Shift amount.
• SFTR and SFTL commands are executed only inside word or long word
type variables.
BCD data is converted into BIN data.
Not executed as an independent command (no type).
<First term> = BIN<Second term>;
Ex: #MW1000 = BIN #MW1001;
Decimal
No
No
Variable specification
Bit Word Long
word
No Yes Yes
No Yes No
Variable specification
Bit Word Long
word
No Yes Yes
No Yes Yes
Section 6-3
INC/ ABL
influ-
Real Indirect
ence
number specifi-
cation
No No No
No No No
INC/ ABL
influ-
Real Indirect
ence
number specifi-
cation
No No No
No Yes No