Omron CS1W-MCH71 Operation Manual page 265

Data Transfer and Storage
Support Tool
Allocated IF Area
Precautions when
Replacing a Servo Driver
220
8. Saving by Allocated IF Area
Saves the servo parameters of the MC Unit to servo driver's EEPROM and
MC Unit's Flash ROM.
MC Unit
RAM
Servo Parameters
Flash ROM
Servo Parameters
Servo parameters stored in the servo driver are used for actual operations.
For that reason, make sure to read the servo parameters before the replace-
ment, and restore them into the newly replaced servo driver.
Section 5-1
Servo Driver
RAM
Servo Parameters
EEPROM
Servo Parameters