Omron CS1W-MCH71 Operation Manual page 470

Interface Specifics
Status Condition
Effect of Other Functions
Effect on Other Functions
System Parameter
Program Example
System Parameter
Save condition
R1
n+0.01
System Parameter
Save
Timing Chart
Unit Control Bit:
System Parameter Save
Unit Status Bit:
Flash Save Completed
Data in Flash Memory
Name
Flash Save Com-
pleted
• When saving is completed (normal completion or error completion), the
bit [Flash Save Completed] will turn ON.
• The same status bit is used for saving position data. Therefore, it is not
recommended to save system parameters simultaneously with position
data.
Nil
Nil
Nil
n+15.02
Flash Save
Completed
Basic operation:
1
0
1
0
Current
0: Neither parameter nor position data save is completed
1: Parameter or position data save is completed (including
error completion)
Tu
Section 7-4
Specifications
DIFU
R1 Work bit
n+0.01
System Parameter Save
When [Flash Save Completed] is
turned ON, [System Parameter
save] will be turned OFF.
When [System Parameter
Save] is turned OFF,
[Flash Save Completed]
will turn OFF.
Updated
Tu
425