Omron CS1W-MCH71 Operation Manual page 505

Interface Specifics
Effect of Other Functions
Effect on Other Functions
System Parameter
Program Example
Single Block
Operation Condition
460
Name
Executing Motion Outputs the program number of the program currently being
Program Number executed in motion task or temporarily being stopped.
Executing Motion • Outputs the block number of the single execution command
Block Number currently being executed with motion task, or temporarily
(Single execution being stopped.
command)
• During execution of parallel branching, the block number of
the leftmost block is output.
Executed Motion • Outputs the block number of the multiple execution com-
Block Number mand currently being executed with motion task, or tempo-
(Multiple execution rarily being stopped.
command)
• During execution of parallel branching, the block number of
the leftmost block is output.
For details, see Motion Program Start and Start Mode on page 443.
Operation does not stop at the end of the block with [NSTOP command: Sin-
gle block ignored] specification.
Nil
Nil
Section 7-4
Specifications
n+4 to 11.06
Single Block Operation Mode