Omron CS1W-MCH71 Operation Manual page 703

Error Log
Error code Error name
(Hex)
0370 Unit-related alarm
0371 Reserved
0372 Motion task 1 Alarm
0373 Motion task 2 Alarm
: :
0379 Motion task 9 Alarm
037A Axis 1 Alarm
037B Axis 2 Alarm
: :
0398 Axis 31 Alarm
0399 Axis 32 Alarm
658
MC Unit Error Codes
In the detailed codes of each error, the alarm code of each error is set. There-
fore, all the alarms will be stored in the error log.
Detailed code
1st byte 2nd byte
Code of the alarm that has occurred
Code of the alarm that has occurred
Code of the alarm that has occurred
Code of the alarm that has occurred
Code of the alarm that has occurred
Code of the alarm that has occurred
Code of the alarm that has occurred
Code of the alarm that has occurred
Code of the alarm that has occurred
Code of the alarm that has occurred
Section 11-9
Cause
An alarm related to the Unit has occurred.
The same remedy of the corresponding
alarm code should be provided.
An alarm related to motion task 1 has
occurred.
The same remedy of the corresponding
alarm code should be provided.
An alarm related to motion task 2 has
occurred.
The same remedy of the corresponding
alarm code should be provided.
:
An alarm related to motion task 8 has
occurred.
The same remedy of the corresponding
alarm code should be provided.
An alarm related to axis 1 has occurred.
The same remedy of the corresponding
alarm code should be provided.
An alarm related to axis 2 has occurred.
The same remedy of the corresponding
alarm code should be provided.
:
An alarm related to axis 31 has occurred.
The same remedy of the corresponding
alarm code should be provided.
An alarm related to axis 32 has occurred.
The same remedy of the corresponding
alarm code should be provided.