Table of Contents
Advertisement
2.2.4 Installation, maintenance, and disposal
2.2.5 Prerequisites for proper operation
Make sure that the device is connected, installed, serviced, and disposed of
professionally and in line with all relevant standards and safety rules.
CAUTION
Installation requires qualified electrician
A ESR5-NO-41-24VDC may only be fitted and connected by a
qualified electrician or a person who is familiar with electrical
installations.
￫
Dispose of recyclables as required by your local recycling regula-
tions.
Devices no longer being used must be professionally disposed
of as per local regulations. To learn more, please visit:
Eaton.com/recycling.
In order for the device to be able to meet the contractually stipulated terms,
the following must be observed:
•
Only qualified personnel should be allowed to work with the device.
•
The personnel working with the device must have read and understood
all documents for the device and must follow all the instructions in them.
•
The required ambient conditions must be met.
•
Maintenance work must be carried out correctly.
￫
Make sure to read the → disclaimer, ￫ Section 1.1, "Intended
use", page6
We assume no liability for damages, consequential damages, and/or acci-
dents caused by the following:
•
Failure to follow any applicable occupational health and safety rules,
standards, and/or regulations
•
Device failures or function disturbances
•
Improper use and/or handling
•
Not following the instructions or observing the information in the docu-
mentation for the device
•
Alterations, changes, and repairs to the device
ESR5-NO-41-24VDC 11/23 MN049016EN Eaton.com
2 Safety regulations
18
Advertisement
Table of Contents
