Replacement Of Control Cable - ABB M2000 Product Manual

4 Repair

4.5.4. Replacement of control cable

4.5.4. Replacement of control cable
Location of control cable
The control cable is located on the rear of the manipulator base as shown in the figure below.
A more detailed view of the component and its position may be found in chapter
the
xx0200000467
A
B
C
Required equipment
Equipment, etc.
Control cable, spare
Control cable, spare
Control cable, spare
Control cable, spare
126
Product manual, reference
Gasket, base-cover
Attachment screws and washers (9 pcs each), control cable
Control cable, spare
Spare part. no. Art. no.
3HAC 10476-1
3HAC 10477-1
3HAC 11331-1
3HAC 13090-1
information.
Foldouts
Note
3 m
Standard and Foundry
versions
Cover gasket included
7 m
Standard and Foundry
versions
Cover gasket included
15 m
Standard and Foundry
versions
Cover gasket included
22 m
Standard and Foundry
versions
Cover gasket included
3HAC023297-001 Revision: A
in