General Information - ABB M2000 Product Manual

1.2.2. General information

1.2.2.1. Safety, service
Validity and responsibility
The information does not cover how to design, install and operate a complete system, nor
does it cover all peripheral equipment, which can influence the safety of the total system. To
protect personnel, the complete system must be designed and installed in accordance with the
safety requirements set forth in the standards and regulations of the country where the robot
is installed.
The users of ABB industrial robots are responsible for ensuring that the applicable safety laws
and regulations in the country concerned are observed and that the safety devices necessary
to protect people working with the robot system have been designed and installed correctly.
Personnel working with robots must be familiar with the operation and handling of the
industrial robot, described in the applicable documents, e.g. User's Guide and Product
Manual.
Connection of external safety devices
Apart from the built-in safety functions, the robot is also supplied with an interface for the
connection of external safety devices. Via this interface, an external safety function can
interact with other machines and peripheral equipment. This means that control signals can
act on safety signals received from the peripheral equipment as well as from the robot.
In the Product Manual - Installation and Commissioning, instructions are provided for
connecting safety devices between the robot and the peripheral equipment.
3HAC023297-001 Revision: A
1 Safety
1.2.2.1. Safety, service
15