ABB M2000 Product Manual page 202

1 Reference information
1.7. Standard toolkit
1.7. Standard toolkit
General
All service (repair, maintenance and installation) instructions contain lists of tools required
to perform the specified activity. All special tools, i.e. all tools that are not considered
standard as defined below, are listed in their instructions respectively.
This way, the tools required are the sum of the Standard Toolkit and any tools listed in the
instruction.
Contents
Standard tool, IRB 140: 3HAC020812-001 contains:
Qty
1
1
1
1
1
1
1
1
1
1
20
Art. no. Tool
- Ring-open-end spanner 8-19mm
- Socket head cap 2,5-17mm
- Torx socket no:20-60
- Torque wrench 10-100Nm
- Small screwdriver
- Ratchet head for torque wrench 1/2
- Socket head cap no:5, socket 1/2"" bit L 20mm
- Socket head cap no:6, socket 1/2"" bit L 20mm
- Socket head cap no:8, socket 1/2"" bit L 20mm
- Small cutting plier
3HAC023297-001 Revision: A