ABB M2000 Product Manual page 57

Illustration, holes on mounting flange
The illustration below shows the stock holes available for fitting equipment on the mounting
flange.
xx0200000063
Fastener quality
When fitting tools on the mounting flange (see the figures in sections
upper arm
with quality 12.9. When fitting other equipment, standard screws with quality 8.8 can be
used.
3HAC023297-001 Revision: A
on page 54 and Illustration, holes on mounting flange
2 Installation and commissioning
2.3.5. Fitting equipment on manipulator
Illustration, holes on
on page 55), use only screws
55