Viewing Batch-Related Tag Groups; Displaying Unit Tag Groups From The Batch Detail - Siemens SIMATIC PCS 7 OSx Operator's Manual

8.11

Viewing Batch-Related Tag Groups

Displaying UNIT
Tag Groups from
the Batch Detail
SIMATIC PCS 7 OSx 4.1.2 Operator
To display a tag group of all units assigned to the batch, select
on the batch tag detail
the screen at a time. If a batch has more than eight associated units, OSx
displays a message indicating that only eight of the units are displayed.
Figure 8-12 Displaying Assigned Units
(Figure 8-12). Up to eight unit faceplates appear on
Alarm Group:
Alarm State Sequencing:
Alarming:
State:
Display Units
Batch 8-15