Ink Replacement Method; When Ink Near End Is Displayed; When Ink End Is Displayed - MIMAKI JFX550-2513 Operation Manual

1.4 Ink Replacement Method

When Ink Near End is Displayed

Ink levels are low. We recommend replacing with new Ink bottle as soon as possible. Note that ink may run
out during printing.
You can check which Ink bottle must be replaced in INK STATUS on touch panel.

When Ink End is Displayed

The ink has run out. Replace with new Ink bottle.
Thoroughly read the following and make sure you understand its contents.
Ink and other liquids used with this machine
• Pay close attention to ventilation and be sure to wear safety glasses, gloves, and a mask when
handling ink, maintenance liquid, waste ink, or other solutions used with the machine. Leaking
ink may adhere to the skin or get into the eyes or mouth.
l Clear Ink
The types of clear ink that can be used will vary depending on the ink type mounted. Note that only the
following combinations can be used.
Mounted ink type
LUS150 ink
l Ink caps
The type of ink cap that can be used will vary depending on the ink type. Note that only the following
combinations can be used.
Ink type
• LUS150 ink
Clear ink type
LH100 ink
Cap type
[Cap A]
49
Chapter 1 Before Use
"INK STATUS"(P. 97)
1