Table of Contents
Advertisement
LM Guide
Wipe off dust from the left and right ends of the LM guide surface with a soft dry cloth.
• The LM guide is lubricated. Never wipe with solvents such as ethanol. Wipe off any excess or
dripping lubricant with a soft dry cloth.
Jam Sensor Detecting Plate Cleaning
Continuing to use the dirty carriage underside will rub dried ink and attached dust on to the media, resulting
in contaminated prints.
1
Clean the jam sensor detecting plate.
• Clean the jam sensor detecting plate underside at the left and right sides of the carriage.
• Wipe off any ink and dust adhering using a cleaning stick moistened with maintenance liquid. Wipe
off the maintenance liquid. Make sure none remains.
19
3. Performing Maintenance
Advertisement
Table of Contents
