Status Monitor Under Normal Conditions - Toshiba TOSVERT VF-nC3E Instruction Manual

8.2 Status monitor mode
8.2.1
In this mode, you can monitor the operation status of the inverter.
To display the operation status during normal operation:
Press the MODE key twice.
Setting procedure (eg. operation at 40Hz)
Item displayed
Operation
frequency *
Parameter setting
mode
Direction of
rotation
Operation
Note 1
frequency
command *
Note 2
Output current *
Note 3
Input voltage *
8
Output voltage *
Inverter
load factor *
Operation
frequency *
(Continued overleaf)
* Monitor items can be selected by setting parameters  to , ().
Refer to page H-8 for notes.

Status monitor under normal conditions

Panel LED
operated display


MODE

MODE






Communic
ation No.
The operation frequency is displayed (Operation at
60Hz). (When standard monitor display selection
 is set at 0 [operation frequency])
The first basic parameter "" (history function)
is displayed.
The direction of rotation is displayed.
FE01
(: forward run, : reverse run)
The operation frequency command value (Hz/free
FE02 unit) is displayed.
( In case of = )
The inverter output current (load current) (%/A) is
FE03 displayed.
( In case of = )
The inverter input voltage (DC detection) (%/V) is
FE04 displayed.
( In case of = )
The inverter output voltage (%/V) is displayed.
FE05
( In case of = )
The inverter load factor (%) is displayed.
FE27
( In case of = )
The operation frequency (Hz/free unit) is
FD00 displayed.
( In case of = )
H-2
E6582233
Description
Note 11