Installation Procedure; Installation Requirements; Environment; Machine Level - Ricoh R-C4 Service Manual

21 July 2006

1. INSTALLATION PROCEDURE

1.1 INSTALLATION REQUIREMENTS

1.1.1 ENVIRONMENT

1. Temperature Range:
2. Humidity Range:
3. Ambient Illumination:
4. Ventilation:
5. Ambient Dust:
6. Avoid an area which is exposed to sudden temperature changes. This includes:
1) Areas directly exposed to cool air from an air conditioner.
2) Areas directly exposed to heat from a heater.
7. Do not place the machine in an area where it will be exposed to corrosive
gases.
8. Do not install the machine at any location over 2,000 m (6,500 ft.) above sea
level.
9. Place the copier on a strong and level base. (Inclination on any side should be
no more than 5 mm.)
10. Do not place the machine where it may be subjected to strong vibrations.

1.1.2 MACHINE LEVEL

Front to back: Within 5 mm (0.2") of level
Right to left: With in 5 mm (0.2") of level
10°C to 32°C (50°F to 89.6°F)
15% to 80% RH
Less than 1,500 lux (do not expose to direct sunlight.)
Room air should turn over at least 30 m3/hr/person
Less than 0.10 mg/m
1-1
INSTALLATION REQUIREMENTS
3