Programming System Settings; Set The Chiller Temperature; Set The Time And Date - Agilent Technologies Magnis G9710A User Manual

Programming System Settings

Set the chiller temperature

When the system is running a protocol, the temperature of the chiller is dictated by the protocol
parameters. During setup of a protocol run, however, the chiller is pre-cooled to the temperature
specified on the Chiller Setting screen. The temperature is set to 12°C by default, but
temperatures from 4°C to 12°C are permitted.
Only users with Advanced access are permitted to set the chiller temperature.
1 From the Home screen, press Settings.
The
2 Press System Settings.
The
3 Press Chiller Setting.
The
Figure 12 Chiller Setting screen
4 On the Chiller Setting screen, enter the temperature for the chiller (°C) into the provided field.
5 Press Close to save your changes.

Set the time and date

The times and dates recorded in the system's log files are based on the time and date settings for
the system.
1 From the Home screen, press Settings.
The
2 Press System Settings.
The
3 Press Date & time Settings.
Magnis and MagnisDx NGS Prep System User Guide
Settings screen opens.
System Settings screen
Chiller Setting screen opens.
Settings screen opens.
System Settings screen
opens.
opens.
28