Controllers
Installing a type-o storage controller
Prerequisites
Before installing this option, be sure you that have the following:
•
The components included with the hardware option kit
•
T-10 Torx screwdriver
Procedure
1.
Power down the server.
Remove all power:
2.
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
Do one of the following:
3.
•
Extend the server from the rack.
•
Remove the server from the rack.
4.
Remove the access panel.
Remove the rear wall blank or riser cage.
5.
Remove the OCP adapter blank.
6.
Controllers
47