Tools Menu - SATO PW208NX Operator's Manual

Starting Up the Printer

2.6.6 Tools Menu

In the Tools menu, the setting items are as follows:
Tools
1 Test Print
2 HEX-Dump
3 Reset
4 Service
5 Factory
6 Wi-Fi Site
Survey
Test Print
Tools > Test Print
To perform a test print, the setting items are as follows:
1 BD Address
2 Factory
3 Configure List
4 Configure QR
5 Paper Sensor
108
Mobile printer PW208NX/PW208mNX
Perform a test print.
Set the HEX-Dump mode and how to manage the received
buffer data and log files.
Initialize printer settings.
These are the setting items for service. Strictly for SATO
authorized service personnel use.
These are the setting items for service. Strictly for SATO
authorized service personnel use.
Make a survey of the wave strength for each access point
and display or print the survey results.
Perform the BD Address test print with QR code and
Code 39.
Perform the factory test print.
Print the configuration information of the printer.
Print the configuration information with a QR code.
Print the wave form of media sensor level.