How To Install A Tape Drive; Before You Begin - Sun Microsystems Fire V890 Service Manual

How to Install a Tape Drive

Before You Begin

The Sun Fire V890 server does not come with a tape drive. If you are installing a
SCSI tape drive for the first time, you must order and install the following
components:
SCSI tape drive
■
SCSI host adapter card (Sun part number X6758A)
■
Ultra Wide SCSI data cable (Sun part number 530-3302)
■
Complete these tasks:
"How to Power Off the System" on page 5
■
"How to Open and Remove a Side Door" on page 21
■
"How to Avoid Electrostatic Discharge" on page 26
■
To install the SCSI host adapter card, complete this task:
"How to Install a PCI Card" on page 83
■
Note – The SCSI host adapter card must be installed in PCI slot 0.
148 Sun Fire V890 Server Service Manual • October 2005