Sun Microsystems Fire V890 Service Manual page 158

i. PCI external status cable (P23) to connector J3101(P23)
9. Replace the PCI card bracket.
a. Position the PCI card bracket in the system.
b. Replace the four Phillips screws that secure the PCI card bracket to the chassis
and the I/O board stiffener.
c. Connect the PCI internal status cable (P36) to the I/O board at connector
J3102(P37).
10. Replace the eight PCI card dividers from top to bottom.
a. Carefully align the divider card with its tabs on the divider base.
Ensure that the back end of the divider is over the metal tab on the back of the
system and that the plastic tab on the front of the divider is aligned with its slot
on the PCI card bracket.
b. Push the card firmly into the tabs on the divider base.
130 Sun Fire V890 Server Service Manual • October 2005