Sun Microsystems Fire V890 Service Manual page 146

b. Remove the four Phillips screws securing the PCI card bracket to the chassis
and the I/O board stiffener.
c. Pull the PCI card bracket from the system.
d. Place the bracket on an antistatic mat.
4. Disconnect the following cables from the I/O board:
For cable connector locations, see "Cable Connector Locations" on page 212.
a. DVD-ROM cable (P1) from connector J3402(P1)
2
b. I C cable (P18) from connector J3805(P18)
c. System status assembly cable (P32) from connector J3803(P32)
118 Sun Fire V890 Server Service Manual • October 2005