9. Power on the system.
See
Section 4.1, "Powering On the System" on page
administration manual.
5.3
Tape Drive
Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing them on any surface.
Note – The tape drive has a SCSI ID of 5.
The tape drive is located in the removable media module, located at the right front
of the system (
FIGURE 5-11
).
FIGURE 5-11
Tape Drive and DVD-ROM Drive Location—System Front View
4-1, and refer to the system
CD-ROM drive
Tape drive
Chapter 5 Storage Devices
5-11