5. Replace the two Phillips screws that secure the Gigabit Ethernet connector
housing to the rear panel.
6. Connect the motherboard power cable (P8) to the motherboard at connector J4702
(Main Power).
7. Connect the motherboard power cable (P9) to the motherboard at connector J4701
(48 Volt Power).
8. Connect the base backplane FC-AL cable (A and B) to the motherboard at
connectors A(FCALIN) and B(FCALOUT).
9. Connect the CPU/Memory board status assembly cable (P35) to the motherboard
at connector P35.
Chapter 2 Servicing the Motherboard Side Components
73