3
C H A P T E R
Servicing the Input/Output Board
Side Components
This chapter describes how to remove and replace the system input/output (I/O)
board and components on the I/O side of the system. For a list of part numbers for
field-replaceable units (FRUs) and optional equipment, see
Breakdown" on page
The following tasks are covered in this chapter:
"How to Remove an I/O Fan Tray" on page 76
■
"How to Install an I/O Fan Tray" on page 78
■
"How to Remove a PCI Card" on page 80
■
"How to Install a PCI Card" on page 83
■
"How to Remove the System Controller Card" on page 87
■
"How to Install the System Controller Card" on page 91
■
"How to Remove the Sun StorEdge PCI Dual Fibre Channel Host Adapter Card"
■
on page 94
"How to Install the Sun StorEdge PCI Dual Fibre Channel Host Adapter Card" on
■
page 98
"How to Remove the PCI Internal LED Flex Circuit" on page 102
■
"How to Install the PCI Internal LED Flex Circuit" on page 104
■
"How to Remove the PCI External LED Flex Circuit" on page 106
■
"How to Install the PCI External LED Flex Circuit" on page 107
■
"How to Remove the I/O Fan LED Flex Circuit" on page 109
■
"How to Install the I/O Fan LED Flex Circuit" on page 111
■
"How to Remove the System ID PROM" on page 112
■
"How to Install the System ID PROM" on page 114
■
"How to Remove the I/O Board" on page 116
■
"How to Install the I/O Board" on page 124
■
247.
"Illustrated Parts
75