b. Rotate the PCI retaining clip over the back of the filler panel until it snaps into
place.
7. If you are not immediately replacing the card, remove the Sun StorEdge PCI Dual
Fibre Channel Host Adapter FC-AL cable from the system.
a. Disconnect the FC-AL cable (D and C) from connectors D and C on the base
FC-AL backplane.
b. Remove the cable from the three tie wraps on the chassis power bay.
What Next
To replace the Sun StorEdge PCI Dual Fibre Channel Host Adapter card, complete
this task:
"How to Install the Sun StorEdge PCI Dual Fibre Channel Host Adapter Card" on
■
page 98
Chapter 3 Servicing the Input/Output Board Side Components
97