What To Do - Sun Microsystems Fire V890 Service Manual

Hide thumbs Also See for Fire V890:

Table of Contents

What to Do

1. Disconnect the AC power cords from the power supplies.

Caution – If you are using an antistatic wrist strap to protect against electrostatic

discharge, connect it to a properly grounded surface, such as a nearby equipment

rack, or a nearby system that is connected to a power source.

2. Locate the system controller card.

The system controller card is installed in a slot on the system I/O board. It is labeled

"SC" on the rear panel.

System controller sot

Sun Fire V890 Server Service Manual • October 2005