Sun Microsystems Fire V890 Service Manual page 223
Hide thumbs
Also See for Fire V890:
- Owner's manual (227 pages) ,
- Rack mounting manual (106 pages) ,
- Diagnostic manual (104 pages)
Table of Contents
Advertisement
b. Base/expansion cable (P1) to the base backplane at connector J0801
2
c. I
C cable (P20) to the expansion backplane at connector J0800
12. Replace the lower I/O fan tray bracket.
a. Connect the fan status cable (P27) to the connector on the back of the I/O fan
status flex circuit.
b. Place the lower I/O fan bracket into the system against the centerplane.
Ensure that the ribbon cables behind the lower I/O fan bracket remain flat against
the centerplane.
c. Fasten the two Phillips screws that secure the lower I/O fan tray bracket to the
centerplane.
13. Replace the lower CPU fan tray bracket.
a. Replace the four flathead Phillips screws that secure the bracket to the chassis.
Chapter 6 Removing and Installing Backplanes and Cables
195
Advertisement
Table of Contents
