Sun Microsystems Fire V890 Service Manual page 213

3. Remove the I/O side fender from the system.
a. Remove the Phillips screw from the top of the fender.
b. Holding the front of the fender, rotate it out and away from the chassis.
The fender is held in place by two tabs on the back of the fender that fit into the
lower chassis.
4. Remove the six CPU-side screws securing the disk cage to the system.
a. Remove both CPU fan trays.
b. Remove the five screws securing the CPU fan tray guide to the chassis.
Chapter 6 Removing and Installing Backplanes and Cables 185