8. Using a No. 2 Phillips screwdriver, fully tighten the right-side captive screw and
repeat for the left-side screw.
What Next
To reassemble the system, complete this task:
"How to Close a Side Door" on page 23
■
If you installed this part as a new option, you need to perform a reconfiguration
boot. A reconfiguration boot is required in order for the operating system to
recognize the new device. See:
"How to Initiate a Reconfiguration Boot" on page 10
■
Note – Be sure to run POST and OpenBoot Diagnostics tests to verify that the
system functions correctly with the parts you have just installed. Refer to OpenBoot
PROM Enhancements for Diagnostic Operation on the Sun Fire V890 Documentation
CD.
2
Chapter 2 Servicing the Motherboard Side Components
1
39