Sun Microsystems Fire V890 Service Manual page 84

Note – Ensure that the fan tray cable is not in the path of the fan tray that you will
install.
2. Align the fan tray to be installed with its plastic guide in the chassis.
3. Slide the fan tray into the chassis.
4. If you disconnected the cable to fan tray 6 to install fan tray 5, reconnect the cable
to fan tray 6.
Caution – If you are performing a hot-swap procedure, do not put your hand into
the empty fan bay. The fan in the populated fan tray is still spinning.
5. Tighten the captive screw on the fan tray.
6. Connect the motherboard fan tray cable to its connector.
56 Sun Fire V890 Server Service Manual • October 2005