Sun Microsystems Fire V890 Service Manual page 306

2
6
3
4
5
11. Perform a reconfiguration boot of the Solaris software. At the ok prompt, type the
boot -r command.
ok boot -r
12. Verify that the Solaris software recognizes both the base and expansion
backplanes. At the Solaris prompt, type the luxadm probe command.
# luxadm probe
Found Enclosure(s):
SUNWGS INT FCBPL
Logical Path:/dev/es/ses0
SUNWGS INT FCBPL
Logical Path:/dev/es/ses2
The luxadm probe command displays the enclosure name, World Wide Number,
and logical path name for each FC-AL backplane. Notice that the display shows the
same enclosure name (FCloop in the example) for both backplanes. Also note the
logical path name of each device. You need this information to perform
278 Sun Fire V890 Server Service Manual • October 2005
2 0 21000004cf837f8d
6 0 5080020000197379
3 0 21000004cfce7fb7
4 0 2100002037b3f76c
5 0 2100002037e7efec
Name:FCloop
Name:FCloop
SEAGATE ST336605FSUN36G 0438
SUNW SUNWGS INT FCBPL922A
SEAGATE ST336752FSUN36G 0408
SEAGATE ST336704FSUN36G 0726
SEAGATE ST336704FSUN36G 0726
Node WWN:508002000017c4d8
Node WWN:50800200001cb798
Step 13.