About Serial Port Jumpers
The serial port jumpers (J2902 and J2903) on the system I/O board configure the
system's two serial ports for either EIA-423 or EIA-232D signal levels. EIA-423 levels
are the default standard for North American users. EIA-232D levels are required for
digital telecommunication in nations of the European Community.
J2902
J2903
Jumper
Shunt on Pins 1 + 2 Selects
EIA-232D
EIA-232D
Shunt on Pins 2 + 3 Selects
EIA-423
EIA-423
Chapter 7 Hardware Configuration
Default Setting
2 + 3
2 + 3
241