Sun Microsystems Fire V890 Service Manual page 157

7. Replace the hex standoffs that secure the serial port plate to the system rear panel.
8. Reconnect the following cables to the I/O board:
For cable connector locations, see
a. I/O board power cable (P14) to connector J3203(P14)
b. I/O board remote sense cable (P29) to connector J3202(P29)
c. I/O signal cable (P26) to connector J3201(P26)
d. Fan status cable (P28) to connector J3801(P28)
e. Fan power cable to connectors J3804(P6), J3807(P10), and J3806(P3)
f. System status assembly cable (P32) to connector J3803(P32)
2
g. I C cable (P18) to connector J3805(P18)
h. DVD-ROM cable (P1) to connector J3402(P1)
"Cable Connector Locations" on page
Chapter 3 Servicing the Input/Output Board Side Components
212.
129