What Next; How To Install A Cpu/Memory Board; Before You Begin - Sun Microsystems Fire V890 Service Manual

What Next

If you are installing a replacement CPU/Memory board, you must transfer all
memory modules from the faulty board to the replacement board. Complete these
tasks:
"How to Remove a Memory Module" on page 40
■
"How to Install a Memory Module" on page 44
■
To reassemble the system, complete this task:
"How to Close a Side Door" on page 23
■
If you are not replacing the part right away, you need to perform a reconfiguration
boot. A reconfiguration boot is required in order for the operating system to
recognize the configuration change. See:
"How to Initiate a Reconfiguration Boot" on page 10
■

How to Install a CPU/Memory Board

Before You Begin

Caution - If a CPU/Memory board connector dust cover is installed on the
motherboard CPU/Memory board connectors in the slot where you are installing
the CPU/Memory board, you must remove it. If you have not removed the dust
cover from the motherboard, installing a CPU/Memory board in that slot may
damage the motherboard and the CPU/Memory board.
Note - Use only Sun Fire V890 CPU/Memory boards in the Sun Fire V890 system.
Complete the following tasks:
"How to Power Off the System" on page 5
■
"How to Open and Remove a Side Door" on page 21
■
"How to Avoid Electrostatic Discharge" on page 26
■
34 Sun Fire V890 Server Service Manual • October 2005