What Next - Sun Microsystems Fire V890 Service Manual

Note – The system may take up to 30 minutes to run diagnostic tests and display
status messages before the ok prompt appears on the system console. The time
depends on the system configuration (number of CPUs, memory modules, and PCI
cards) and the configuration of the OpenBoot variables, which by default are set at
diag-level=max and verbosity=normal. To estimate boot time, and to
customize the standard configuration after initial power-on, refer to the OpenBoot
PROM Enhancements for Diagnostic Operation guide, which is included on the Sun
Fire V890 Documentation CD.
5. Turn the keyswitch to the Locked position.
This prevents anyone from accidentally powering off the system.
6. Remove the key from the keyswitch and keep it in a secure place.

What Next

The system's front panel LED indicators provide power-on status information. For
more information about the system LEDs, see
page
If your system encounters a problem during system startup, and the keyswitch is in
the Normal position, try restarting the system in the Diagnostics mode to determine
the source of the problem. Turn the front panel keyswitch to the Diagnostics position
and power cycle the system. See:
"How to Power Off the System" on page 5
■
4 Sun Fire V890 Server Service Manual • October 2005
259.
Locked
position
"About Front Panel LEDs" on