How To Set Up The Split Backplane Dual-Loop Configuration; Before You Begin - Sun Microsystems Fire V890 Service Manual

Backplanes - A=Base, B=Expansion
Default Language is USA English, ASCII
How to Set Up the Split Backplane
Dual-Loop Configuration

Before You Begin

Before you begin to set up the split backplane dual-loop configuration, verify that
the Fibre Channel backplane firmware has been upgraded with the appropriate
software patch cited in
not upgraded, install the appropriate patch as instructed in the README document
for the patch. Both the patch and the README document are available on the
SunSolve Online web site at http://sunsolve.sun.com.
The following procedure is based on the assumption that the expansion backplane is
already installed. If you need to install the expansion backplane, see
the Expansion FC-AL Backplane" on page 171
282 Sun Fire V890 Server Service Manual • October 2005
Temperature Sensors - 0 Base, 1 Expansion
0:23ºC
1Not Installed
A: Not Installed
B: O.K.
"Firmware Patches Required" on page 273. If the firmware is
for instructions.
"How to Install