What Next
To reassemble the system, complete this task:
"How to Close a Side Door" on page 23
■
How to Remove the Motherboard Fan
Status Flex Circuit
Before You Begin
Complete these tasks:
"How to Power Off the System" on page 5
■
"How to Open and Remove a Side Door" on page 21
■
"How to Avoid Electrostatic Discharge" on page 26
■
What to Do
1. Disconnect the motherboard fan status cable from the back of the flex circuit.
2. Remove the two Phillips screws securing the flex circuit to the bracket.
3. Remove the flex circuit from the system.
4. Place the flex circuit on an antistatic mat.
What Next
To replace the motherboard fan status flex circuit, complete this task:
"How to Install the Motherboard Fan Status Flex Circuit" on page 65
■
64
Sun Fire V890 Server Service Manual • October 2005