Removing And Installing Storage Devices; How To Remove A Disk Drive; Before You Begin - Sun Microsystems Fire V890 Service Manual

4
C H A P T E R
Removing and Installing Storage
Devices
This chapter describes how to remove and install storage devices. For a list of part
numbers for field-replaceable units (FRUs) and optional equipment, see
Parts Breakdown" on page
The following tasks are covered in this chapter:
"How to Remove a Disk Drive" on page 133
■
"How to Install a Disk Drive" on page 136
■
"How to Remove the DVD-ROM Drive" on page 138
■
"How to Install the DVD-ROM Drive" on page 141
■
"How to Remove a Tape Drive" on page 144
■
"How to Install a Tape Drive" on page 148
■

How to Remove a Disk Drive

Before You Begin

The system's disk drive hot-plug feature lets you remove a disk drive without
shutting down the operating system or turning off the system power. For more
information about disk drives, refer to the Sun Fire V890 Server Owner's Guide. For
more information about hot-plugging, see:
"About Hot-Pluggable and Hot-Swappable Components" on page 6
■
247.
"Illustrated
133