Sun Microsystems Fire V890 Service Manual page 124

4. Carefully pull the Sun StorEdge PCI Dual Fibre Channel Host Adapter card from
the I/O board.
Hold the card by the faceplate and its opposite edge, and pull up while carefully
rocking the card from end to end until it is freed from its slot.
Caution – Do not apply excessive force to one end or one side of the card. Doing so
could damage the card.
5. Place the card on an antistatic mat.
6. If you are not immediately replacing the Sun StorEdge PCI Dual Fibre Channel
Host Adapter card, install a PCI filler panel into the system rear panel.
a. Slide a PCI filler panel into the slot on the system rear panel.
96 Sun Fire V890 Server Service Manual • October 2005